Product Descriptions:
Bi-Polar LED's and
Bi-Polar Right Angle LED's: When
switch is in one position (i.e. Main Line) the LED is green, LED changes to red
when switch position is changed.
These LEDs work with Tortoise, Switchmaster and
other slow-motion switch machines. For twin coil switch machines such as Atlas
and Peco, extra relay contacts (not included) will be required.
Bi-Polar LED's - $3.50 each or 5 for $17.00
Bi-Polar Right Angle LED's - $4.00 each or 5 for $19.00
Detection Circuits:
We have the answer to all these questions - the Occupancy Detector can see in all those places where you can't.
When you break the infrared "beam", an LED lights. Works well in all lighting conditions, including night scenes or low light areas. Includes Infrared light source and detector.
Requires 12 volt DC accessory power to operate. (All Gauges)
$12.49 each or 3 for $36.00
Detection & Activation Circuits
Infrared
Train Detector and Activator - Perfect for operating
another manufacturer's crossbuck flasher, bell
sounds, signals, etc., this circuit was designed with grade crossings in mind.
When the train breaks one of two (or
four) infrared "beams",
the circuit activates the included DPDT relay. Beam length (between source and detector) can be
up to 8 inches, allowing one beam to cover multiple tracks. Infrared
design allows this circuit to work for night scenes or low light areas just as
well as on a fully lit layout.
Requires 12 Volt DC (All Gauges)
2 beam unit: Includes 2 Infrared light
sources and detectors : $29.00 each
4 beam unit: Includes 4 Infrared light sources and detectors : $33.00 each
Infrared Automatic Flashing Unit - As with our Train detector unit, this product will detect a train using 2 infrared beams. It will then activate and alternately flash crossbucks from other manufacturers.
We're happy that we can now offer this frequently requested circuit.
While we obviously prefer you to buy our crossbucks, we don't expect you to throw away a perfectly good set that you already have...
$39.95 each
Three Way Switch Matrix - For use with slow motion switch machines, this circuit automatically aligns turnouts on your 3 way switch. A simple push of a button operates the circuit and gives you a green indicator light on your control panel indicating which track your train will be taking.
Includes circuit, 3 push button switches, and 3 Red/Green LEDs
$40.95 each
Reversing
Unit: Automatically reverses DC
powered train or trolley direction on your point to point layout. Will
operate equipment with up to 2 amps of power.
Requires 12 volt DC to operate circuit. (N & HO gauge only)
Uses
the same infra-red activation circuit as our detection products (see above).
Reversing Unit: $29.95
12 Volt DC Regulated Power Supply - This wall transformer provides Regulated 12VDC Power for your accessories.
Rated for 500mA, and comes with adapter plug and color coded wires.
$20.95 each
1 1/2 Volt Power Adapter - Converts your accessory power(2-18 volts, AC or DC) to a regulated 1.5 volts DC. Ideal for powering mini lights in the buildings on your layout.
$15.00 each
We are happy to offer advice as to the usage of our products in any particular application. If you are not sure if one of our products fits your application please contact us. Information on this page is subject to change; prices shown are accurate as of Fall 2009.
Prices listed are in US Dollars and do not include shipping charges, however, only ACTUAL shipping charges will apply.
For additional Product and Ordering Information, e-mail info@berkshirejunction.com
We can also be reached by snail mail at:
Berkshire Junction P.O. Box 205 Adams , MA 01220 Tel: (413) 743-3960
